Electrical Calibrations

On Site Calibrations

Using our Time 5051 Calibrator we are equipped to conduct electrical calibrations on site for electrical equipment and testing instruments to a UKAS or traceable standard across the ranges shown in the table below.

Generation Resistance 0Ω to 1GΩ
Measurement Resistance 0Ω to 100MΩ
Generation DC Voltage 0 to 1000V
Measurement DC Voltage 0 to 1000V
Generation DC Current 0 to 1000A
Measurement DC Current 0 to 3A
Generation AC Voltage 40 to 1kHz / 20mV to 1000V
Measurement AC Voltage 40 to 1 kHz / 10mV to 750V
Generation AC Current 40 to 1kHz / 10mA to 500A
Measurement AC Current 40 to 1kHz / 100mA to 3A

In addition to accommodating Electricians with this service we are capable of offering it to the health industry, therefore taking care of all instruments and equipment that may require calibrating in your electrical department. We can currently calibrate the following in your specified location:

• Multimeters
• Clampmeters
• Insulation-Continuity Testers (Meggers)
• Earth Loop Impedance
• RCD Testers
• Multifunction Installation Testers (16th edition)
• Amp Meters (AC or DC)
• Power Supplies
• mA/mV Source Units
• PAT Testers

If you require electrical calibrations for Temperature Simulators, Indicators, Controllers, Recorders and Sensors these can be carried out to the following ranges:

Noble Metal Thermocouples 0°C to 1760°C
Base Metal Thermocouples -190°C to 1370°C
Resistance Sensors (PT 100) -200°C to 800°C

Please see our UKAS Schedule for more information.

Laboratory Calibrations

Our Time 5051 Calibrator is used in our Laboratory to carry out Electrical Calibrations for all of your electrical equipment and testing instruments to a UKAS or traceable standard across the ranges seen in the table below.

Generation Resistance 0Ω to 1GΩ
Measurement Resistance 0Ω to 100MΩ
Generation DC Voltage 0 to 1000V
Measurement DC Voltage 0 to 1000V
Generation DC Current 0 to 1000A
Measurement DC Current 0 to 3A
Generation AC Voltage 40 to 1kHz / 20mV to 1000V
Measurement AC Voltage 40 to 1 kHz / 10mV to 750V
Generation AC Current 40 to 1kHz / 10mA to 500A
Measurement AC Current 40 to 1kHz / 100mA to 3A

In addition to accommodating Electricians with this service we are capable of offering it to the health industry, therefore taking care of all instruments and equipment that may require calibrating in your electrical department. We can currently calibrate the following in your specified location:

It is possible for us to calibrate the following in our laboratory:

• Multimeters
• Clampmeters
• Insulation-Continuity Testers (Meggers)
• Earth Loop Impedance
• RCD Testers
• Multifunction Installation Testers (16th edition)
• Amp Meters (AC or DC)
• Power Supplies
• mA/mV Source Units
• PAT Testers

If you require electrical calibrations for Temperature Simulators, Indicators, Controllers, Recorders and Sensors these can be carried out to the following ranges:

Noble Metal Thermocouples 0°C to 1760°C
Base Metal Thermocouples -190°C to 1370°C
Resistance Sensors (PT 100) -200°C to 800°C

Please see our UKAS Schedule for more information.